EFREI
Module 2 Project 2
Cisco
Networking Laboratory
Last
Update: 5/26/2014
Web page: http:// www.engr.sjsu.edu/ciscolab
Lab. Location: ENGR 490
Lab Manuals: To access
each of the lab manuals:
username: TBA
password: TBA
Lab Hours: (until 5/13)
Monday
: 2pm - 4pm
Tuesday : 2pm - 4pm
Thursday: 1pm - 3pm
Submit to the
TA Dr. Jing Huang, sjsu.efrei@gmail.com completed lab reports for the
following lab sessions:
Lab 1: Routing
Basics
Lab 3: Routing
Information Protocol (RIP)
Lab 4: Open
Shortest Path First (OSPF)
Lab 5/6: QoS
Due Date:
Note: Lab reports
will be accepted through Saturday 5/31.
Mon 4/28 Lab 1
Mon 5/12 Lab 3
Fri 5/16 Lab 4
Fri 5/23 Lab
5/6
Notes when using the GNS3 Emulator:
á For installation and configuration of the virtual lab,
follow the documentation on the website of GNS3. Here is the link http://www.gns3.net/
á For Lab 3:
a.
Use "NM-4T" as the adapter
for each router.
b.
When configuring the IP address for
each interface, type in "interface serial0/0" instead of
"interface fast0/0".
á For Labs 3, 4, and 6:
o
Use
"NM-4T" for the adapter.
o
Make
sure all the interfaces used in labs are activated by running
"no shutdown".
á For Labs 5/6
o
The
formula (Tc=Bc/Be) in page
10 of lab 5 is wrong. Ignore it as well as the entire page 11 of lab 5. The
correct formula is on page 14 of lab 6, Tc=Bc/CIR.
o
While
doing Lab 6, pay extra attention in typing the commands, and strictly follow all
the steps.