|
Secret
Number |
Midterm2
out of 110 |
Midterm2
letter |
Comment |
|
1 |
75 |
3.30 |
Points
1-6 OK except group box still has a label.
Point 7, half credit--change to radians and back to degrees, gamma is
wrong. Point 9 works, but 8, 10, and
11 do not. |
|
3 |
64 |
2.60 |
initial value of gamma is wrong.
5 points for point 8 even though an exception is thrown. Points 7, 9, 10, 11 do not work. |
|
5 |
NS |
0.00 |
under
discussion |
|
6 |
100 |
4.10 |
9 does not work.
Error handler on gamma is not as specified but is nice--I did not take
off anything for it. |
|
7 |
99 |
4.00 |
everything working but point 10.
Ok and cancel locations are switched. |
|
8 |
|
0.00 |
point 6 not working;
wrong ID in title bar; other defects as well. |
|
9 |
43 |
0.00 |
No
default data in gamma box in dialog, or on main form. Dialog title missing. Half credit on 3,
nothing on 4; 5 and 6 working OK; 7-11 not working. |
|
10 |
68 |
2.80 |
after switching to radians/Pi and choosing OK, data does not reinitialize correctly, so
half off on point 4. Gamma box is not
read-only; default data is wrong; point 7 ok, 8 not working, 9 not working
but "cat" is caught when OK is pressed, 5 points for that; 10 not working so 11 not checked. |
|
11 |
86 |
3.60 |
initial data not quite as specified; group box still labeled.
Cancel and OK buttons in wrong place; but otherwise 1-8 work fine. Half credit for 9 as there is a crash
before the error provider shows up. 10 does not
work. Half credit for 11 as I can
cancel on illegal numerical data but not on "cat". |
|
13 |
60 |
2.30 |
point 4 not working (switch to degrees, OK, crash when you try to bring up the
dialog.) Half credit
on point 7--the roles of the buttons are switched. Half credit on 8.
Points 9, 10 not working so 11 not checked. |
|
14 |
45 |
0.00 |
points 1,2 OK; point 3 zero
point 4 half credit; points 5 and 6 OK. Points 7-11 do not work. |
|
15 |
75 |
3.30 |
1 to 6
OK; 7 half credit (gamma doesn't change right); 8 doesn't work; 9 is OK.
Can't check 10 or 11 since gamma doesn't recalculate |
|
17 |
45 |
0.00 |
Cancel
does not work. Radio button not
initialized properly. |
|
18 |
53 |
1.80 |
gamma box is not read-only. Point 4 does not work. Half credit on 7 since gamma doesn't change
correctly. 8 through 11 don't work. |
|
19 |
75 |
3.30 |
point 3 does not work.
Point 7 does not work. Half
credit on point 8. Point 10 does not work |
|
21 |
60 |
2.30 |
Point 4
not working; 5 and 6 OK; 7,8,10,11 not working but 9 is OK |
|
22 |
NS |
0.00 |
|
|
24 |
104 |
4.20 |
change to radians, press OK,
bring up dialog again, wrong
data. Three points off on number 3 for
that. Everything else working almost,
but you can tab out of a box after writing "cat" there (although
the error provider does occur)--minus two points for that, and the error
provider on point 11 is not on the specified field, minus one point. |
|
28 |
85 |
3.60 |
initial data is not as specified; in particular the button says
Radians/Pi instead of degrees. Point 7
ok Point 8 almost ok but data is changed on keystrokes, not on tab or click.
Point 9 ok. Point 10 does not work, so
11 not checked |
|
29 |
68 |
2.80 |
No default
data in gamma box in dialog, or on main form. 60 points for 1-6. Three points for 7 as SOME change happens
on the radio buttons. Gamma is
calculated on keystrokes rather than on tab or click, so 5 points on number
8. |
|
31 |
49 |
0.00 |
gamma box is not read-only.
Point 4 not working; points 7-11 not working |
|
33 |
58 |
2.25 |
Points
1-6 work OK except gamma is not displayed in Form1. Nothing past point 6 works |
|
35 |
NS |
0.00 |
|
|
38 |
65 |
2.70 |
dialog title missing; group box still has label. No default data
shows in the main form, incorrect default data in dialog; point 4 not
working. 7 works, 8-11 do not. |
|
41 |
50 |
1.00 |
point 4 does not work.
Points 7-10 do not work; 11 not checked. |
|
42 |
65 |
2.70 |
half off on point 3, it always initializes to the default
data. Point 4 not working. 5 and 6
OK. Point 7 is working, 8 is not, 9
is, 10 not working so 11 not checked. |
|
43 |
100 |
4.10 |
point 10 has a big problem as the error provider is often shown
on valid data. |
|
45 |
60 |
2.30 |
half off on point 3, wrong initial data. Points 4-6 ok. Half off on point 7, gamma
doesn't change correctly. Points 8-11
not working. |
|
47 |
100 |
4.10 |
Everything
but point 9 is working perfectly. |
|
49 |
NS |
0.00 |
present
but did not submit |
|
50 |
|
0.00 |
point 5
not working |
|
51 |
85 |
3.60 |
points 1-3 ok. Point 4, -5 for
initializing in radians. Points 5
through 9 OK. Point 10 doesn't work so
11 not checked. |
|
52 |
90 |
4.00 |
point 10 does not work, so 11 not checked. |
|
53 |
65 |
2.70 |
no initial data on form, Initialization not working, but it has to do
with bad radio button programming. So
10 points for 3 and 4
together, either 10 for
4 and 0 for 3, or 5 for each. Half credit on 7. 8 not working. 9 OK. 10 not working, so 11 not checked. |
|
54 |
60 |
2.30 |
points 1-6 work, but nothing beyond that. |
|
55 |
|
0.00 |
point 6
not working; |
|
57 |
60 |
2.30 |
point 4 not working. Point
7 not working, 8 ok, 9-10 not working so 11 not checked |
|
60 |
20 |
0.00 |
points 1-2 only work.
Cannot enter any data. |
|
64 |
78 |
3.40 |
Gamma box
is not read-only. Points 8,10 do not
work, so 11 not checked |
|
65 |
48 |
0.00 |
No ID in
title bar. Group box still has label.
Incorrect title in dialog.
Point 4 does not work. Points 7-11 do not work. |
|
66 |
40 |
0.00 |
no initialization (points 3 and 4 don't work). Point 7 doesn't work, indeed it crashes if
you change to Radians/Pi and press OK.
Points 8-11 don't work. It also
crashes if I press OK without entering data. |
|
67 |
63 |
2.50 |
point 4 not working; 3 points on 7 since one button works; 9
OK, 8 and 10 not working so 11 not checked. |
|
68 |
NS |
|
|
|
69 |
|
0.00 |
point 5
not working |
|
73 |
50 |
1.00 |
Point 3
does not work. 4-6 are OK. 7-11 do not
work. |